(LS) Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 1.2V 1Rx8 Unbuffered ValueRAM Notebook Laptop Memory
- Product SKU: MEKVRN41X8G32
- Category:Computer Components & Hardware,RAM
- Warranty : 120 Months
- Width : 42 mm
- Length : 68 mm
- Height : 8 mm
Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 SDRAM 1Rx8 non-ECC 22-22-22 1.2V ValueRAM PC4-3200 Memory module DRAM
This document describes ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 SDRAM 1Rx8 non-ECC 22-22-22 1.2V ValueRAM PC4-3200 Memory module DRAM
This document describes ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
Free Shipping - Free Shipping over $1,000
Estimated Delivery Time:
- Metro Areas: 4-12 business days
- Regional Areas: 7-14 business days
Return & Refund
- The item must be unused and in the same condition that you received it
- Returns are accepted within 30 days of delivery
- For any questions contact, support@goodmayesonline.com.au.
- Refund will be processed within 2-3 working days post-pickup.
